Clinical Assessment & Surgical Considerations: Straumann® BLX
The Straumann® BLX system represents a paradigm shift in surgical bone management for clinicians targeting immediate placement and immediate loading. Unlike conventional bone-level implants that rely strictly on bone removal and frictional fit, BLX integrates a variable-core cylindrical-to-tapered geometry paired with deep bidirectional cutting flutes. This architecture progressively collects, redistributes, and condenses native trabecular bone laterally along the osteotomy walls without generating detrimental cortical necrosis.
From a biomechanical standpoint, combining high-tensile Roxolid® (TiZr) metallurgy with the TorcFit™ 7-degree conical connection allows surgeons to deploy narrow-diameter fixtures (3.5 mm and 3.75 mm) even under demanding occlusal loads while maintaining insertion torques up to 80 Ncm. Moreover, the slim, uniform prosthetic TorcFit platform simplifies restorative inventory: every BLX implant from Ø 3.5 mm to Ø 6.5 mm utilizes the exact same prosthetic connection.
For anatomical safety near the maxillary sinus floor or the inferior alveolar nerve canal, BLX incorporates a rounded, flat-bottomed apex designed to reduce vertical perforation risk compared to ultra-sharp apical blades. Paired with the hydrophilic SLActive® surface, osseointegration matures within 3 to 4 weeks, eliminating the traditional biological dip in secondary stability between weeks 2 and 4.
Biomechanical & Clinical Engineering Specifications — Straumann® BLX
Comprehensive 12-point surgical & biomechanical architecture with technical cross-section visuals
Macro-Design & Thread Architecture
Fully tapered core with bidirectional progressive threads (1.6mm pitch) and rounded self-tapping apex.
- Core Geometry: Slim, tapered outer contour paired with a dynamic expanding core for radial trabecular compaction.
- Thread Profile & Pitch: Deep variable-depth progressive threads with wide 1.6 mm pitch and double-thread entry at the apex to accelerate insertion.
- Apex & Anatomical Safety: Flat, rounded apex with bidirectional cutting flutes enabling gentle redirection without biting aggressively into the sinus membrane or nerve canal.
- Crestal Collar & Platform Switch: Reduced neck diameter (back-taper crown design) relieves cortical bone strain and incorporates built-in platform switching.
Implant-Abutment Connection
TorcFit™ 7° conical Morse taper; unified across all diameters (3.5–6.5 mm); < 0.5 µm seal.
- Connection Angle & Geometry: Proprietary TorcFit™ precision 7° conical friction-fit connection with 6 internal indexing slots.
- Micro-Gap Seal: Sub-0.5 µm hermetic seal blocks bacterial colonization and prevents crestal pumping under cyclic loading.
- Uniform Platform Advantage: Every BLX fixture diameter (3.5 mm to 6.5 mm) shares one single TorcFit™ restorative connection diameter, slashing clinical inventory.
Biomaterial & Metallurgy
Roxolid® (85% Ti / 15% Zr); > 1000 MPa tensile strength; exceptional fatigue resilience.
- Alloy Composition: Roxolid® high-performance Titanium-Zirconium alloy (~85% Titanium, ~15% Zirconium) developed exclusively by Straumann.
- Mechanical Fatigue Limit: Ultimate tensile strength exceeding 1,000 MPa (~24% stronger than cold-worked Grade 4 pure titanium).
- Narrow Ridge Confidence: Allows safe use of 3.5 mm and 3.75 mm fixtures in narrow ridges, preserving natural vascularized buccal bone without grafting.
Surface Treatment & Hydrophilicity
SLActive® superhydrophilic (0° contact angle, Sa 1.5–2.0 µm); 3–4 weeks healing.
- Hydrophilic Chemistry: SLActive® nitrogen-shielded acid etching stored in isotonic NaCl solution, achieving a 0° water contact angle.
- Micro-Topography: Bimodal Sa roughness of 1.5–2.0 µm (20–40 µm macro-pits overlaid with 2–4 µm acid micropores and nanostructures).
- Cleanliness & Rapid Healing: XPS/SEM verified minimal atmospheric carbon contamination; shortens osseointegration from 8 weeks down to 3–4 weeks.
Dimensional Range & Anatomy
Diameters: 3.5 to 6.5 mm (RB & WB bases); Lengths: 6 mm (Short) to 18 mm.
- Diameter Portfolio: Regular Base (RB): Ø 3.5, 3.75, 4.0, 4.5 mm. Wide Base (WB): Ø 5.0, 5.5, 6.5 mm (for immediate molar sockets).
- Length Options: 6 mm short implants for posterior mandible atrophy; standard 8, 10, 12, 14 mm; 16 & 18 mm for pterygoid/tilted protocols.
Clinical Performance & Torque
Up to 80 Ncm max insertion torque; ISQ > 70; optimized for D1–D4 bone.
- Insertion Torque Target: Recommended 35–50 Ncm for immediate loading; mechanically tested up to 80 Ncm without internal hex stripping.
- Bone Density Adaptation: Controlled under-preparation for soft D3/D4 maxillary bone; optional dense-bone cortical tap prevents D1 compression ischemia.
Surgical Kit & Guided Workflow
VeloDrill™ system (minimal heat, physical depth stops) + coDiagnostiX® guided templates.
- VeloDrill™ Engineering: Color-coded stepped drills engineered to keep osteotomy heat well below the 47°C necrosis threshold with low-speed or standard protocols.
- Guided Surgery: Seamless integration with Straumann C-Guide sleeves and coDiagnostiX® 3D surgical planning software.
Prosthetic Ecosystem & Digital CAD/CAM
Variobase® XC Ti-bases, SRA Multi-Unit (17°/30°), Novaloc®, official exocad/3Shape libraries.
- Restorative Versatility: Complete portfolio including Variobase® XC titanium bases, Screw-Retained Abutments (SRA 0°/17°/30°), and angled screw channels.
- Digital Workflow: Certified mono-piece scan bodies and official OEM libraries pre-loaded in exocad, 3Shape, and CARES® Visual.
Scientific Evidence & Literature
98.8% 10-year ITI documented survival rate; ISO 14801 fatigue superiority.
- Clinical Longevity: Backed by International Team for Implantology (ITI) multi-center trials demonstrating > 98.8% 10-year CSR and < 0.4 mm marginal bone loss.
- Mechanical Fatigue Proof: Roxolid® BLX exceeds ISO 14801 dynamic cyclic loading endurance benchmarks compared to Grade 4 systems.
Certifications & Regulatory Compliance
CE Class IIb (EU MDR 2017/745), US FDA 510(k), Turkey TİTCK/ÜTS, RFID Implant Passport.
- International Approvals: Full regulatory compliance under European MDR 2017/745, US FDA 510(k), Health Canada, and ISO 13485.
- Turkey Registration & Passport: Registered on Turkish Ministry of Health ÜTS portal with gamma sterilization validation and QR lot traceability.
Packaging & Surgical Ergonomics
Touch-free blister & titanium glass ampoule with direct contra-angle pickup.
- Mountless Handling: Direct pick-up via TorcFit™ contra-angle driver from the sealed saline cylinder—zero fixture mount removal step.
Warranty & Global Supply Chain
Straumann Lifetime Guarantee on implants & prosthetics; active in 100+ nations.
- Lifetime Guarantee: Unconditional lifetime implant replacement guarantee and continuous availability of spare prosthetic screws in 100+ countries.